日本SSD西西蒂离子棒除静电电极日本SSD西西蒂离子棒除静电电极静电消除电极体积小。

产品型号：CABS-AW-2-2-430

更新时间：2025-06-16

厂商性质：代理商

访问量：21

服务热线

13915577898

立即咨询

产品分类

PRODUCT CLASSIFICATION

防静电设备

日本SSD西西蒂

查看全部产品

日本SSD西西蒂株 CABX350/600离子风棒半导体离子发生器

AND 微型電子天平 / 微型電子天平 BM-5D 20台现货美萨全系列代理

美萨代理IIJIMA饭岛电子IS-300,食品用微虽酸素分析计现货30台

美萨全系列代理现货SSD杆式CABX ELIMINOSTAT Series

产品介绍

日本SSD西西蒂离子棒除静电电极这是一种使用 HDC-AC 方式的小型棒型 AC 离子发生器。

日本SSD西西蒂离子棒除静电电极静电消除电极体积小，控制器和高压电源分开，因此可以安装在狭窄的空间内。此外，它是一种高性能型，配备了各种传感器，例如高压异常检测、带电物体检测、离子量检测和放电针泄漏检测
这是采用 HDC-AC 方式的小型条形 AC 离子发生器。静电消除电极体积小，控制器和高压电源分离，即使在狭窄的空间也能安装。此外，它是配备了高压异常检测、带电物体检测、离子量检测、放电针脱落检测等各种传感器的高功能型。

Equipped with a discharge needle loose detection sensor (Needle Error)It is equipped with

a newly developed discharge needle loss detection sensor (Needle Error). We will inform you of installation abnormalities such as forgetting to attach the discharge needle when replacing it.

Ion amount detection sensor (Cleaning)Equipped ion amount detection (Cleaning) notifies
you of a decrease in static elimination capacity due to dirt.
Equipped with a charged object proximity sensor, a
new charged object detection sensor function (ChargeSNS) is also installed. Detects the approach of an electrically charged object.
Increased length varietyElectrodes
can be manufactured in 40 mm increments from a minimum of 110 mm to a maximum of 1030 mm. Under 1m, the variety of products has increased compared to CABX.
30% improvement in static elimination performanceIn
the case of short-distance static elimination, the static elimination effect has been increased by 30% by optimizing the structure. (CABX Comparison)
Improved safetyA
safety cover is now included as standard on the discharge hand. It can be easily installed by sliding, so please attach it as necessary. (Fig. 1)

Fig. 1 Installation of discharge needle safety cover

Product model name

When ordering, please contact us with the following product model name. The controller and high-voltage power supply are set in one set for each electrode.

Product model name		CABS-AW-y-z-ｘｘｘｘ　＊1 ＊2
System configuration	Static elimination electrode (with 1m high-voltage cable)	CABS-DBW-ｘｘｘｘ　＊1
	High voltage power supply	CABS-TR1
	controller	CABS-CT1-ｘｘｘｘ　＊1
	CT-TR connection cable	CABS-CTRCB-2M (cable length 2 m) or CABS-CTRCB-5M (cable length 5 m)
	Power & Signal Cables	CABS-PSCB-2M (cable length 2 m) or CABS-PSCB-5M (cable length 5 m)

*1 The
controller is adjusted for each electrode length, so the length is listed in the model. It cannot be attached to electrodes of different lengths. In addition, it is not possible to connect multiple electrodes to the same controller or high-voltage transformer.

*2
y specifies the length of the CT-TR connection cable. 2:2 m and 5:5 m
z specify the length of the power and signal cables. 2:2m、5:5m

Product Variety

The length of the static neutral electrode can be selected from 110 mm to 1,030 mm.
The high-voltage power supply and the anti-static electrode are connected by a 1 m high-voltage cable.
y is the length of the CT-TR connection cable, and z is the length of the power and signal cables.

Example: CABS-AW-2-5-510
Electrode length: 510 mm, CT-TR connection cable: 2 m, Power and signal cable: 5 m

Air flow rate (typical example, reference value)

Static elimination electrode length	Air pressure (MPa)
Static elimination electrode length	0.1	0.2	0.3	0.4	0.5
CABS-AW-y-z-110	3	4	6	7	9
CABS-AW-y-z-270	10	16	22	27	32
CABS-AW-y-z-430	18	28	37	47	56
CABS-AW-y-z-590	25	38	50	63	76
CABS-AW-y-z-750	32	48	65	82	99
CABS-AW-y-z-910	37	58	78	98	119
CABS-AW-y-z-1030	42	64	87	108	133

Unit:l/minANR

specification

Model	CABS-AW-x-y-****
System configuration	Static elimination electrode: CABS-DBW-××××1 Controller: CABS-CT1-××××1 High voltage power supply: CABS-TR1 CT-TR connection cable: CABS-CTRCB-xM (x=2 or 5) Power supply and signal cable: CABS-PSCB-yM (y=2 or 5)
Electrical Specifications	Input voltage: DV24V±5% Power consumption: 12VA Output voltage: ±8kV 0-p
Ion generation method	Corona discharge method
Air piping	Outline φ6 air tube
Maximum air supply pressure	0.5MPa
Available air	Clean Dry Air
Static elimination time	Within 1.0 sec (at a distance of 300 mm, air pressure of 0.3 MPa, and electrode length of 350 mm)

*1: The length of the electrode is entered. A type controller of the same length can be connected to the electrode.

External Drawing

View as PDF

各类日系工业品:,SSD西西蒂(离子风扇)、AND爱安得（电子天平）、SAN-EI三英(点胶阀） HOYA光源,KURABO脱泡机,USHIO牛尾照度计,Tsubosaka壶坂电机,IMV爱睦威,PISCO匹士克接头,hakko八光电机,lambda拉姆达膜厚仪,MUSASHI武藏,SAKURAI樱井,aitec艾泰克,otsuka大塚（膜厚仪、粒度仪）,Hitachi日立（扫描电镜）,MIKASA米卡萨（旋涂设备、显影）、POLARION普拉瑞、AITEC艾泰克（检查光源）、Iwasaki岩崎、OTSUKA大塚电子（光学膜厚仪）、KOSAKA小坂（台阶仪）、HORIBA堀场仪器（分析仪）、SIBATA柴田科学（环境测定）、TORAY东丽浓度仪（氧气分析仪）、yamada山田卤素强光灯、CEDAR思达

上一个：MCPD-6800Otsuka大塚多通道光谱仪