日本SSD西西蒂条形防静电棒高压电源分离型静电消除电极体积小，控制器和高压电源分开，因此可以安装在狭窄的空间内。 此外，它是一种高性能型，配备了各种传感器，例如高压异常检测、带电物体检测、离子量检测和放电针泄漏检测

a newly developed discharge needle loss detection sensor (Needle Error). We will inform you of installation abnormalities such as forgetting to attach the discharge needle when replacing it.

• Ion amount detection sensor (Cleaning)Equipped ion amount detection (Cleaning) notifies
  you of a decrease in static elimination capacity due to dirt.

• Equipped with a charged object proximity sensor, a
  new charged object detection sensor function (ChargeSNS) is also installed. Detects the approach of an electrically charged object.

• Increased length varietyElectrodes
  can be manufactured in 40 mm increments from a minimum of 110 mm to a maximum of 1030 mm. Under 1m, the variety of products has increased compared to CABX.

• 30% improvement in static elimination performanceIn
  the case of short-distance static elimination, the static elimination effect has been increased by 30% by optimizing the structure. (CABX Comparison)

• Improved safetyA
  safety cover is now included as standard on the discharge hand. It can be easily installed by sliding, so please attach it as necessary. (Fig. 1)

Product model name

When ordering, please contact us with the following product model name. The controller and high-voltage power supply are set in one set for each electrode.

*1 The
controller is adjusted for each electrode length, so the length is listed in the model. It cannot be attached to electrodes of different lengths. In addition, it is not possible to connect multiple electrodes to the same controller or high-voltage transformer.

*2
y specifies the length of the CT-TR connection cable. 2:2 m and 5:5 m
z specify the length of the power and signal cables. 2:2m、5:5m

Product Variety

The length of the static neutral electrode can be selected from 110 mm to 1,030 mm.
The high-voltage power supply and the anti-static electrode are connected by a 1 m high-voltage cable.
y is the length of the CT-TR connection cable, and z is the length of the power and signal cables.

Example: CABS-AW-2-5-510
Electrode length: 510 mm, CT-TR connection cable: 2 m, Power and signal cable: 5 m

Air flow rate (typical example, reference value)

Unit:l/minANR

*1: The length of the electrode is entered. A type controller of the same length can be connected to the electrode.